G60-24L5 is a main member of digital-chargers from Green Digital Power-tech Co., Ltd. It represents today's new technology for 18V(5s) Li-Ion, Polymer. G60-24L5 programmed 4 stages (Ip, Im, Um, Cut) charging process, It is designed for 2~14Ah Li-Ion/Polymer battery pack. Stage "Ip" is a pre-charge function for deep discharged battery pack, this is helpful for battery's cycle life. When the battery recovered by pre-charge small current, stage "Im" will give bulk current charging( up to 50W). Then, "Um" stage is followed, the output voltage is limited on C.V point, until the charge current declined to 0.2A . At this stage, the battery is charged completely and the charger will cut off output automatic.
Further, this G60 charegr can display the charging process, indicate the battery capacity level from 25% to 100% timely. This is helpful for user.
For more safety, this G60 charger will inter protection mode when the battery polarity reversed our the output connectors shorted.
Specification for G60-XXXX
| Input Voltage |
100-240VAC, 50-60Hz |
| Input Current |
1.1A |
| Back current drain |
<1mA |
Constant Voltage
Limit (C.V.) |
G60-12L3 |
G60-12L4 |
G60-24L5 |
G60-24L7 |
G60-24L6 |
G60-24F8 |
| 12.6V |
16.8V |
21V |
29.4V |
25.2V |
28.8V |
| Bulk charge current |
3.3A |
2.8A |
2.2A |
1.6A |
2.0A |
1.6A |
| Operate Temperature |
-20ºC~50ºC |
| Cooling |
Natural convection. Do not cover the charger. |
| Charge principle |
Auto 3 stages: pre-charge, then C.C. mode, then C.V mode, then OFF |
| Battery type |
Li-ion/Polymer |
| Battery capacity |
3-25Ah for G60-12XX, 2~14Ah for G60-24XX |
| Size |
120 x 67 x 41mm |
| Enclosure |
IP54 (Dust protected, Water splashing resistance) |
| Weight |
270g |
How to use:
1. Connect the AC cord to the socket, The "power" lamp will light on solid.
2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, 4 lamps will flashing, please check the setup.
3. Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
The table shows the duration of 90% state charged for an empty battery.
| Battery type(Ah) |
G60-24L5 hours |
G60-24L6 hours |
| 2 |
2 |
2 |
| 4 |
4 |
3.5 |
| 8 |
5 |
6 |
| 14 |
8 |
10 |
Audited Supplier 
){kind=link}
){kind=link}