G100-36L family products are main member of Green Digital Power-tech Co., Ltd. It represents today's new technology for 37V 10s Li-Ion/Polymer battery pack charging. G100-36L programmed 4 auto stages (Pre-CC-CV-Cutoff) charging process,It is designed for 2~14Ah Li-Ion/Polymer battery pack. Stage "Pre" is a pre-charge function for deep discharged battery pack, this is helpful for battery's cycle life. The pre-charge current is less than 1/3 C.C value. When the battery recovered by pre-charge small current, stage "CC" will give constant current charging, the charge current up to 90W. Then, "CV" stage is followed, the output voltage is limited on C.V value, until the charge current declined to 1/8 C.C. At this stage, the battery is charged completely and the charger will cut off output automatic.
Further, G100-36L can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G100-36L will inter protection mode when the battery polarity reversed our the output connectors shorted.
General Specification for G100-36L
Input Voltage: AC 100~240V 50/60Hz
100-240VAC, 50-60Hz |
Input Current: Max.1.6A
Max.1.6A |
| Output |
G100-12F |
G100-12L |
G100-24F |
G100-24L |
G100-36L |
G100-36F |
G100-48F |
G100-48L |
| C.V |
14.4V |
16.8V |
28.8V |
29.4V |
42.0V |
43.2V |
54.0V |
54.6V |
| C.C |
5.0A |
4.5A |
2.8A |
2.8A |
2.0A |
2.0A |
1.7A |
1.7A |
| Operating |
-20ºC~40ºC |
| Cooling |
No fan designing, natural convection. Do not cover the charger. |
| Charge process |
Auto 4 stages: Pre-CC-CV-Cutoff
Cut-off when charge finished. |
| Battery |
37V 10 Cell Li-ion/Polymer Battery-pack. |
| Size |
170 x 70 x 51mm |
| Enclosure |
ABS+PC Plastic housing, inlet type C8 or C14 |
| Weight |
400g |
How to use:
1. Connect the AC cord to the socket, The "power" lamp will light on solid.
2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, "Warning" lamp will flashing, please check the setup.
3. Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
An example shows the duration of 90% full charged for an empty battery pack.
| Battery capacity |
G100-36L |
| 3.0Ah |
1.5 hours |
| 6.0Ah |
3 hours |
| 10Ah |
5 hours |
| 20Ah |
10 hours |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}